Pair remote control method
First, complete the code clearing. Press the learning button and the buzzer will beep three times and then beep a long time. Press one of the keys on the remote control. The buzzer will beep twice and then stop beeping, indicating that the code is successfully configured.
There are three working mode: Momentary/Toggle/Latching.
Press different remote button to match with receiver, working mode is different.
Momentary:
Press the Transmitter button 1 to match with receiver, the receiver relay 1th is ON, release button 1; the receiver relay 1th is OFF, the same as 2/3/4/5/6/7/8/9/10/11/12. 12CH are independent.
Toggle:
Press transmitter button 3 to match with receiver , the receiver relay 1th is ON, press button 1 again, the receiver relay 1th is OFF,the same 2/3/4/5/6/7/8/9/10/11/12. 12CH are independent.
Latching:
Press transmitter button 2 to match with receiver
note:
Press remote control key 4 to learn ——1-6 channel Momentary 7-12 Toggle
Press remote control key 5 to learn ——1-6 channel Momentary 7-12 Latching
Press remote control key 6 to learn ——1-6 channel Latching 7-12 Toggle
Press remote control key 7 to learn ——1-4 channel Momentary, 5-8 Latching, 9-12 Toggle,
Press remote control key 8 to learn ——1-6 channel Toggle, 7-12 Momentary
Clear code method:
Power on, then clear the code. Press and hold the learning button on the control panel for 8 seconds until the buzzer stops, that is, all the remote controllers that learn the code matching will be automatically cleared. After clearing, the remote control that has previously learned to code will no longer be controlled.